0.5T vs 1T vs 2T vs 3T Commercial RO System: How to Choose

What daily water demand tells you about required RO capacity

Daily water demand is a measure of how much treated water your site needs across its working day. You should establish that requirement before choosing a nominal hourly capacity, because the model number describes output per hour rather than the total volume your equipment needs over a day.

First, record the treated water required by your connected equipment during a normal working day, using measured consumption where available. Second, divide that daily requirement by the hours you intend to produce water, then assess the result against expected output under your feed conditions. Third, compare the available nominal capacities of 0.5, 1, 2 and 3 T/h without treating their ratings as confirmed production at your site. Allow your enquiry to explain variations in daily demand. For example, a commercial laundry can submit its equipment list and daily washing volume for assessment.

How operating hours change the size you need

Operating hours are a planning input that connects your daily water requirement with the hourly production capacity you need. You should check the hours available for water production alongside your equipment schedule, since a capacity comparison needs both a daily demand figure and a realistic operating window for your site.

First, state when your site needs treated water and when you intend the RO equipment to operate. Second, use those available production hours to calculate the hourly requirement from your measured daily demand, while recognising that actual output varies with feed-water quality and temperature. Third, compare that requirement with nominal options such as 1 T/h and 2 T/h, and explain any planned downtime when requesting a recommendation. Keep production hours separate from the hours your connected equipment consumes water. For example, a commercial laundry can share its washing schedule alongside its proposed RO operating hours.

Why peak use and storage tanks matter more than the model number

Peak use is a measure of the treated water your equipment needs during its busiest operating period. You should compare that demand with production during the same period and assess any proposed storage, because a nominal hourly model rating does not describe the timing of consumption across your working day.

First, identify which connected machines draw water together and record the demand during that period. Second, send the usable volume of any existing or proposed storage tank, together with the times when water can be produced. Third, assess a nominal 3 T/h option against that operating pattern rather than selecting it from daily consumption alone. Ask for the capacity recommendation to address both your peak requirement and the proposed tank arrangement, using your actual site information. For example, a commercial laundry can identify washing machines that operate simultaneously during its peak operating period.

What feed-water quality does to real output against nominal output

Nominal output is a model’s stated hourly water production rating, while actual output varies with feed-water quality and water temperature. You should provide information about your source water before comparing capacities, because the stated rating alone cannot establish how much treated water the equipment will produce at your site.

First, send your water source, temperature and available analysis, including hardness, TDS or conductivity, pH, chloride, iron and manganese. Second, discuss suitable pretreatment, because RO membranes need filtration, softening or antiscalant dosing to avoid scaling and fouling. Third, check the reference raw-water inlet pressure of 0.1-0.3 MPa against your supply information, and distinguish it from the membrane inlet pressure of 0.6-1.0 MPa. Include silica and turbidity results where available, and explain whether the supply is seasonal. For example, an industrial pure water enquiry can include a well-water analysis and the required water quality at use.

How to compare 0.5T, 1T, 2T and 3T options on one page

A capacity comparison is a review of nominal hourly ratings against the same demand, operating schedule and feed-water information. You should use consistent site inputs for every option, because comparing model names without those inputs leaves the relationship between your water requirement and the proposed equipment unclear for your application.

First, place the nominal 0.5, 1, 2 and 3 T/h options alongside your calculated hourly requirement and peak operating pattern. Second, check electrical compatibility: the reference supply for 0.5T is 220 V / 50 Hz, while 1T and above use 380 V / 50 Hz. Third, compare the proposed pretreatment, configuration and equipment dimensions, with pump and membrane brands confirmed at quotation. State any storage arrangement so each proposal addresses the same conditions, and distinguish equipment dimensions from packing dimensions. For example, a commercial laundry can compare proposals using the same equipment list and water source.

What to send for a capacity recommendation

A capacity enquiry is a set of site measurements and operating requirements used to assess a suitable nominal RO size. You should send demand and feed-water information together, because an hourly rating becomes useful for selection when it is considered alongside your production window, peak use and available electrical supply.

First, send your daily treated water requirement, intended production hours, busiest consumption period and any storage details. Second, provide the source water analysis, temperature and seasonal changes, together with the target water quality at the point of use. Third, state your available voltage and frequency, noting that 0.5T has a reference supply of 220 V / 50 Hz. Include your connected equipment and installation arrangement so the enquiry describes how water will be used. For example, a commercial laundry can send its washing volume and equipment list to yeyiyulong@163.com or WhatsApp +852 5762 0371.

Ask Liangpu